ive set some Rig in browser mode on midi PrgChg#2 and I set program changing on MC6 also number 2, But the odd is like mc6 sent midi PC #3 instead #2 and so on , like (n+1 )
The Program Change numbers displayed in the Profiler's user interface range from 1 to 128 and are incremented by +1 versus the real 7-bit values received, which range from 0 to 127. Many MIDI controllers are flexible to apply a reverse logic (display number n, transmit number n-1). If your MIDI controller is set to a fixed 0-127 range, your only option is to use another bank (e.g. starting from PC#10) and set your Profiler MIDI assignments appropriate
does it mean I have to assign rig with pc number start from #10 to fixed this ?.
I Have read somewhre in the net
http://foobazaar.com/wikpa/index.php?title=MIDI
Program change mismatches
The Program Change numbers displayed in the Profiler's user interface range from 1 to 128 and are incremented by +1 versus the real 7-bit values received, which range from 0 to 127. Many MIDI controllers are flexible to apply a reverse logic (display number n, transmit number n-1). If your MIDI controller is set to a fixed 0-127 range, your only option is to use another bank (e.g. starting from PC#10) and set your Profiler MIDI assignments appropriate
does it mean I have to assign rig with pc number start from #10 to fixed this ?.
ive Check with midi monitor the the messages number is correct , does it mean the problem is on kemper side ?
Hi Irfan, can you share some screenshots of your settings? Also, can you check www.midimonitor.com and see if the messages are coming out as expected?