Strymon and Line 6 not responding to Midi Clock

Yep. That was it. Seems to be responding fine now. Thanks for hashing this out with me.

Seems like that is a small bug where if you toggle into editor mode, the midi clock will stop. However, if you toggle out of editor mode, the midi clock will not start unless you power cycle the MC6.

Can you try power cycling the MC6 without toggling into editor mode? Does it work for you?

We'll release a fix for this in the next couple of days.

But it's not consistent...not doing it now

Yes....and all devices respond when tapping in tempo manually.

Thanks! When you change the tap menu setting to Yes, does the menu appear on the MC6 ? Also, when testing, be sure to toggle out of editor mode

Thanks! Can you see the midi clock parameters as well?

Sorry....it switched to a preset that wasn't set to send clock Here's one that is.

Hmm, I don't see a MIDI clock message in your settings. Is it on the second page?

Regarding the preset manager, we'll look into it.

Also I'm on newest firmware...and this was happening on previous firmware as well.

Can you send your preset settings? Using the preset manager to download. Or a screenshot of your settings for that preset.

When you connect the MC6 via USB to computer and go to www.midimonitor.com

Do you see any messages?

No Midi clock when plugged directly into Timeline or directly into HX. Timeline is receiving program and control changes, as well as sending MIDI thru to HX when chained.

Don't have my board at hand right now, but I will try that as soon as I'm able.

Try connecting the MC6 directly to the Timeline first, does it work then?

MC6 > ML5> Strymon Timeline > Line 6 HX Effects.

What is your MIDI chain like? And what Line 6 and Strymon product are you using?

That was the first thing I checked.

You need to turn on the Midi Clock setting in the Strymon global settings