I'm Trying to figure out how to set up Bank 30 to be my Preset Scroll Page to scroll presets on my Strymon Timeline, Strymon BigSky and Eventide H9. I'll set up each with its own up and down button - Problem is i can't find a PC# or CC# that controls the Preset scroll function on the Strymon pedals ? I know it will bank up and bank down, but i would like to scroll through the onboard presets directly from the MC6 MK2 without touching the other devices. I know its possible with Midi because my old DMC 3XLGen 2 would allow me to do so. Any help would be Appreciated.
top of page
bottom of page
Thank you for this info !! I haven't had to do and midi command assignments before - with the DMC it was pretty much plug and play - the MC6 MK2 does so much more but Knowing what commands mean and what #s to assign for what function, really wish there were more video tutorials on the MC6. thanks again for your time !!!
H9 is a bit different, I think. With the H9 control app, you assign CC #s for Increment and Decrement preset.
So if you have increment preset set to CC#1 and decrement preset set to CC#2, you would set up your MC6 as follows:
- Go up a preset = CC message, CC# = 1, CC value = 127
- Go down a preset = CC message, CC# = 2, CC value = 127
You could try a simple PC scroll message with that, but if it doesn't work I'd try the above method.
Awesome !! i would assume same deal with the Eventide H9 ?
Correct! PC messages are pretty universal. If a device receives a PC Scroll Up message, it knows to "advance" to the next PC message. All you need to specify is the MIDI channel and you're good to go. I have this set up on my Strymon Mobius and it works perfectly.
Thank You !! so its automatic I don't have to add any PC or CC Values in ? I'll try this when i get home from work.
You should just be able to set up a PC Scroll Up and PC Scroll Down midi type, and let it know which channel to send the message to. So if your Timeline is on Midi Channel 1, then send PC Scroll Up and PC Scroll Down to midi channel 1. If your BigSky is on channel 2, assign the PC Scroll Up and PC Scroll down messages to midi channel 2. Etc.