Hi, I am using the MC6 with my Axe FX III. I have been able to program the foot switches on bank one (& page 1) to perform functions such as turning onand off effects, engaging looper, setting tempo, turning on tuner etc. what I can't seem to get it to do is to have a foot switch change banks up or down or to have a footswitch toggle the pages. I would prefer for example, to be able to do a long press or double tap on a foot switch to go up a bank or down the bank as opposed to pressing buttons one and two simultaneously or two and three simultaneously
top of page
To test this feature, visit your live site.
MC6/Midi newbie - how to assign bank up down to footswitch ?
MC6/Midi newbie - how to assign bank up down to footswitch ?
6 comments
Like
6 Comments
bottom of page
Hi, thank you for your response! You are right....when I disconnected after programming the functions worked. It never dawned on me that I had to disconnect from the editor to enable some functionality as others worked while connected.
Thx
Derek
Hi Derek
When testing those functions, be sure to toggle out of editor mode. Those functions are locked in editor mode to help with editing. Could you confirm if the issue you face exists when the MC6 is not in editor mode?
Hi, thanks for your response. I have located those functions and have tried assigning them to an action such as a press or a double tap however nothing ever executes or the functions don't take place. I have assigned a number of other functions such as the total on-off and so on and then saved to the device so I am consistently making the changes and saving but have found that neither the back up or down or page toggle seem to work. I can take a screenshot of what the Web editor looks like to see if that helps and provides additional information. I have tried it both ways with toggle on and toggle off.... neither seems to work.
thanks,
Derek
Hi Derek,
Under the midi types, there are functions to do what you described, such as "Bank Up" or "Bank Down" as well as "Toggle Page". You simply need to match them with the desired action you want to take. Do let us know if you have any issues using them.
Hi, thanks for your response. I am using the MKII running the latest firmware 3.1.0
Thanks,
Derek
Hi Derek, Are you using the MC6 MKI or MKII?